Locations: Basalt, Colorado; Grand Junction, Colorado.
First stop was to work on a Wurlitzer jukebox model 1100 (1948). Like many 1940’s Wurlitzers I’ve worked on, the selector shaft and heart-shaped cam was not rotating due to lack of recent lubrication. This causes it to play one selection regardless of what was selected. Unfortunately, it’s not an easy thing to get freed up, and takes a lot of exercising and time.
The jukebox needed some other adjustments, such as the turntable height and the clutch. I replaced the line cord because it was in very dangerous condition. The color cylinder plastic sheets were also replaced. This was an original, un-restored 1100 in good condition.
Next stop was to work on two Williams electro-mechanical (EM) pinball machines, Grand Prix and Aztec (both 1976). The main problem with these machines were the stepper units were not freely ratcheting up and down. This is the number one problem with EM pinball machines. A quick disassembly, cleaning and lubrication fixes the problem. Occasionally the spring tension needs to be adjusted.
The Aztec was missing some electrical parts, which can’t be obtained unless someone is parting one out. But I got it working as best I could.
Next stop was an AMI jukebox, model A (1946), which is also known as the Mother of Plastic. The selection mechanism was frozen due to lack of recent lubrication. Like the 1100 above, it took a while to get it unfrozen and moving freely. The selection buttons needed some contact cleaning and lube (buttons would stick when pressed). The tonearm wire where it plugs into the amp needed to the resoldered. All in all, a great sounding jukebox.
It was satisfying to breathe some new life into these old machines.